Bottom Drive Horizontal Carousels Specifications

Structural Features

• Modular design permits installation, expansion or relocation.
• Bottom supporting frame distributes load uniformly over large floor area.
• Capacity classes up to 2500 pounds per bin live load.
• Carousel is tested and sections are match marked before shipment.
• Units can be stacked without the need for full mezzanine to make use of total available height.
• Catwalks or mezzanine can be mounted directly to top of carousels or supported between units.
• Single carousel capacity up to 217,000 pounds.

Bins and Shelves

• Units can be furnished with an even or odd number of bins from 10 to 140 bins.
• Choice of bin depth, height and width, with adjustable dust free wire shelves on varying spacing.
• Bin heights of 73, 85, 97, 109, 121, 133, and 145 inches standard. Special heights on application.
• Overall height 14.25 inches greater than bin height.
• Bin widths (inside) of 14.75, 18, 20.1, 24.5, 26.5, 30, 32, 36, 40 inches
• Unique bin design distributes shelf loads through the two sides and back of bin, forming a rigid box structure, then through bin base plate to wheels and track.
• Approximately seven degree slope of shelves using 18 inch shelves (16 inch deep bin) to counteract centrifugal force. Angle varies with depth and shelf spacing.
• Standard bin depths 12, 16, 20, inches.
  Optional depths on application.
• Shelf depth is two inches greater than bin depth
• Shelf ratings: 75 lbs, 150 lbs, 200 lbs.
  Special higher rating on applications
• Shelf is easy to remove and adjust on choice of centers. No bolts.
• Shelf spacing six inch standard. Optional: 2, 2.5, 3, 3.5, 4, 5, 6, 7 inches.