2100 and 2200 Specifications

2100 Product Range (Filing Application replacement of 2000 PowerFile)

• Pan width: 89-1/4 and 102 inches (inside dimension)
• Pan depth: 18-1/2 inches (inside dimension)
• Pan pitches: 11, 14, 16, and 18 inches
• Number of pans: 8 to 30
• Counter depth: 12 inches
• Carousel depth: 48 inches (not including counter)
• Carousel width: 105-3/4 and 118-1/2 inches
• Carousel height: 7-1/2 to 18 feet

2200 Product Range

• Pan width: 102 and 118 inches(inside dimension)
• Pan depth: 24-1/2 inches(inside dimension)
• Pan pitches: 12, 15, 18, and 19 inches
• Number of pans: 8 to 30
• Counter depth: 14-5/8 inches
• Carousel depth: 64 inches (not including counter)
• Carousel width: 134-1/2 inches
• Carousel height: 7-1/2 to 20 feet

Standard Features

Frame: Bolt-together modular design. Frame components can be disassembled for limited clearance installations. Built-in load distribution base frame members.

Pans: Single tier or Multifunctional with divider slots and bolted shelf second tier.

Main opening: 20 inch high opening at front of unit. Manually operated single sliding door with key lock latch.

Counter: Mounted below main opening at a height of 40 inches from floor (34 inches for ADA units). Brushed stainless steel finish.

Service opening: Two lockable access panels below counter and at each side.

Controller: Externally mounted unit located above main opening. Enclosure houses optional fluorescent lights, operator interface terminal, and has hinged, locking cover.

Operator interface terminal: Centrally mounted keypad with manual E-stop, enable, and jog buttons.

Safeties: Lockable disconnect switch, E-stop button, touch bar, infrared photo eyes, access panel interlock switches, and motor overload.

Drive motor: 1.5 hp continuous duty AC gear motor with integral spring-set brake.

Conveyor mechanism: Heavy duty scissor arm assemblies. Fully enclosed stabilizer track. Single piece drive shaft. Load chain safety factor: 7.1 Permanently lubricated idle and drive sprocket bearings.

Finish: Powder coat pearl gray exterior with powder coat white pans. Special colors available.

Optional Features

Dust cover: Four segment steel top cover.

Lighting: Fluorescent lights.

Communication port: RS-232 or Ethernet.

Pick-to-Light: Indicator lights and/or digital displays built into counter top.

Courtesy outlets: Duplex outlets mount below counter.

Step down transformer: Allows unit to operate on 460 VAC.

Second access opening: Allows pass-through operation of carousel. Includes additional controller, locking door with solenoid interlock, and second counter with or without light bar.

Emergency crank: Power assisted using electric drill.

Performance

Unit capacity: 10,200 pounds, gross load.

Pan capacity: 400 pounds maximum.

Pan speed: 25 feet per minute.

Maximum imbalance: 1,220 pounds.

Duty cycle: 100% continuous duty.

Operating temperature: 40º F to 120º F.

Application Notes

Power requirements: 208-230 V AC, 60 Hz, single-phase, 20 A. Entrance to controller can be through left inside of carousel from above or below unit, or external through left side of enclosure.

Seismic: Zone 4 anchoring available. May require special anchors depending on height of carousel.

Additional models and features are available. Consult your local sales representative for details.

ETL Certified – see 2400