2400 Series Specifications
Standard Features
1800 Product Range
- Pan width: 60, 72, 95, 100, 106, 112, and 130 inches (inside dimension)
- Pan depth: 15-1/2, 16-1/2, and 18-1/2 inches (inside dimension)
- Pan pitches: 10-1/2, 12, 13-1/2, 15, 16-1/2, 18, 19-1/2, 21, 22-1/2, 24, and 25-1/2 inches
- Number of pans: 8 to 50
- Counter depth: 16 inches
- Carousel depth: 56-1/4 inches(not including counter)
- Carousel width: 84.5 to 154-1/2 inches
- Max carousel height: 36 feet
2400 Product Range
- Pan width: 60, 72, 95, 100, 106, 112, and 130 inches (inside dimension)
- Pan depth: 24-1/2 and 25-1/2 inches (inside dimension)
- Pan pitches: 10-1/2, 12, 13-1/2, 15, 16-1/2, 18, 19-1/2, 21, 22-1/2, 24, and 25-1/2 inches
- Number of pans: 8 to 50
- Counter depth: 16 inches
- Carousel depth: 67-3/4 inches (not including counter)
- Carousel width: 84.5 to 154-1/2 inches
- Carousel height: 8 to 36 feet
Frame: Bolt-together modular design. Fully welded side frames and chain tracks. Built-in leveling feet and anchor clips.
Pans: Single tier clear pan. Single or dual access depending on application. Multi-functional with bolted shelves.
Main opening: 22 inch high opening at front of unit. Manually operated bi-parting door with key lock latch.
Counter: Mounted below main opening at a height of 40 inches from floor. Brushed stainless steel finish.
Service opening: Lockable access panel below counter.
Controller: Internally mounted unit is located in the base of the carousel. NEMA-12 style enclosure houses microprocessor control and motor drive.
Operator interface terminal: Centrally mounted keypad with manual E-stop, enable, and jog buttons.
Safeties: Lockable disconnect switch, E-stop buttons, touch bars, infrared photo eyes, access panel interlock switches, and motor overload.
Drive motor: 3.0 hp or 5.0 hp continuous duty AC or DC gear motor with spring-set brake.
Conveyor mechanism: Heavy duty scissor arm assemblies. Fully enclosed stabilizer track. Three-piece drive shaft. Load chain safety factor: 7:1.
Finish: Powder coat champagne texture exterior with powder coat champagne pans. Special colors available.
Optional Features
Pans: Bolted or welded tiers, dividers, special fixturing, and 800 pound capacity available. Pan pitches can be mixed.
Automatic door: Pneumatically operated door activated through controller.
Light curtain: Provides additional coverage of main access opening. Required with automatic door option.
Clean room: Units can be configured to run in Class 10,000 to Class 10 environments. Load port available for semiconductor applications.
Dust cover: Three-piece steel top cover.
Lighting: Fluorescent down lights.
Communication port: RS-232.
Pick-to-light: Indicator lights and/or digital displays built into counter top.
Courtesy outlets: Duplex outlets mount in left or right side post.
Step down transformer: Allows unit to operate on 460 V AC.
Multiple access openings: Up to four openings allow pass-through and/or multiple level operation of carousel. Includes additional controllers, locking doors with solenoid interlocks, and counters with or without light bars.
Emergency crank: Power assisted using hand drill.
Performance
Unit capacity: 25,000 pounds, gross load.
Pan capacity: 600/800 (optional) pounds maximum.
Pan speed: 35 to 40 feet per minute.
Maximum imbalance: 1,800/3,000 (optional) pounds.
Duty cycle: 100% continuous duty.
Operating temperature: 40º F to 120º F.
Application Notes
Power requirements: 208-230 V AC, three-phase, 30 A. As an option, the carousel can use 400-460 V AC, three-phase, 15 A.
Seismic: Zone 4 anchoring available. May require special anchors and clips depending on height of carousel.
Special requirements: All units are ETL listed and can be configured to meet ADA, CE, CSA, Seismic, and SEMI standards.
Additional models and features are available. Consult your local sales representative for details.
|
