Power Column 2 Specifications

Product Range

• Tray width: 48.0, 65.3, and 98.4 inches (inside dimension)
• Tray depth: 25.6 and 32.25 inches (inside dimension)
• Tray height: 2.3 inches, 6.0 with extension, and 10.0 with extension (inside dimension)
• Product height: 3.0 to 20.0 inches
• Number of trays: 100 maximum
• Tray pitch: 4.5 inch minimum, adjustable at .5 inch increments
• Unit width: 63.0, 80.0, and 113.4 inches (not including counter)
• Unit depth: 95.5 and 108.5 inches
• Unit height: 8 to 50 feet

Standard Features

Frame: Bolt-together modular design. Fully welded rack frames. Built-in bearing plate style anchoring feet.

Trays: Galvanized steel tubular sidewalls, corrugated floor pan.

Main opening: 37 inch high opening at front of unit. Halogen down lighting.

Counter: Mounted below main opening at a height of 33 inches from floor. Laminate finish.

Service opening: Lockable access door on side of unit and panel below counter.

Controller: Internally mounted control enclosure mounts in the base of the unit. Enclosure has slide-out panel for servicing microprocessor control and motor drives.

Operator interface terminal: Side-mounted keypad with manual E-stop, enable, and jog buttons.

Safeties: Lockable disconnect switch, E-stop button, access door interlock switch, and motor overload.

Drive motors: Direct drive continuous duty AC gear motors. Vertical - 3 hp , extractor - 1/2 hp.

Lift mechanism: Vertical - heavy-duty rack and pinion drive. Extractor - dual strand roller chain with steel pawls.

Finish: Powder coat white exterior with anodized aluminum corner posts. Special colors available. 

Optional Features

Tray dividers: Steel drop-in dividers quickly configure a tray for small parts storage. Available side extensions produce an equivalent 6 or 10 inch tray sidewall.

Adjustable counter: Linear actuator powered counter moves up or down, at the press of a button, to provide the ideal work height for individual operators.

Light pointer: Software directed, collimated beam spotlight illuminates selected items in the tray, helping the operator to quickly and accurately make picks.

Tilt-tray system: Automatically presents the tray at an ergonomically superior 45 degree angle, minimizing bending and reaching when retrieving items from the back.

Security door: Powered main access door activated through key switch.

Next-tray delivery system: Automatically pre-positions the next tray in the pick sequence, so the moment an operator is done with the current tray, the next tray is ready for picking.

Software: The Power Column 2 is fully compatible with all White Systems inventory control software packages.

Dual access opening: An additional work station can be added at another level.

Transport cart: Use to transport a tray from the workstation to a remote location.

Utility pole: Provides a convenient mounting location for a monitor, keyboard, and scanner.

Performance

Unit capacity: 88,000 pounds, gross load.

Pan capacity: 880 pounds maximum.

Vertical speed: 2.46 feet per second.

Duty cycle: 100% continuous duty.

Operating temperature: 40º F to 120º F.

Application Notes

Power requirements: 480 V AC, three-phase, 15 A.

Seismic: Zone 4 anchoring available. May require special anchors  depending on height of unit.

Special requirements: All units are ETL listed.

Additional models and features are available. Consult your local sales representative for details.